Armgrout Hf 1kg is a polyester-based, two-component resin anchoring grout system formulated for high-speed structural anchoring, rebar fixing, and foundation bolt installation.

It was previously marketed and known under the trade name MYK Anchor HF 66.

It is available at the lowest wholesale rates across Pune City, PCMC, and Pune Rural exclusively at The Changediya Cement in Wagholi, Pune.

Yes, their extensive wholesale supply network covers every neighborhood, highway, and taluka across the entire Pune district without missing any location.

It is ideal for fixing foundation bolts, heavy machinery hold-down bolts, rebar anchoring, and rock bolting in tunnels.

It achieves rapid strength gain, reaching a minimum compressive strength of over 30 N/mm² (MPa) in just 3 hours.

It attains a high ultimate compressive strength exceeding 60 N/mm² (MPa) at 7 days under standard temperature conditions.

Yes, the cured resin is highly resistant to fresh water, salt water, petrol, oils, grease, and most acids, alkalis, and solvents.

Yes, one of its standout features is that it can be successfully applied even underwater.

At 30°C, the working gel time is approximately 12 minutes, requiring immediate placement after mixing.

It is a two-component pre-weighed system consisting of polyester resin and modified mineral fillers.

Holes should be rough-sided, thoroughly cleaned, and dust-free. Pre-washing with water or using inverse dovetail configurations optimizes bond strength.

It is routinely used for anchor sizes up to 25 mm diameter and reinforcement bars ranging from 12 mm to 25 mm.

The resin and modified filler should be thoroughly mixed using a mechanical slow-speed mixer for 2 to 3 minutes until a uniform, homogeneous mix is achieved.

The mixed density at 30°C typically ranges between 1.90 to 2.00 gm/cc.

It has a shelf life of up to 6 months when stored in a cool, dry place under shaded, air-tight sealed conditions.

You can reach the wholesale desk directly at +91-9055079555 or +91-9730463496.

Yes, transparent and fully compliant GST tax invoices are issued for all commercial and wholesale orders.

You can follow them on Instagram @the_changediya_cement and Facebook @thechangediyacement.

You can access their exact store map location via this link: https://maps.app.goo.gl/amJyid1dKXTsUaJr8.

Yes, it is non-expansive, relying on high resin bond strength rather than gas generation for secure anchoring.

Inserting the bolt or rod with a twisting or ripping action ensures the resin completely fills the annular space without trapping air.

Avoid skin contact. If contact occurs, wash immediately with soap and water; in case of eye contact, rinse with plenty of water and seek medical advice.

Yes, because it attains over 30 MPa strength in 3 hours at 30°C, early application of load is fully supported.

Simply contact now at +91-9055079555 or explore their official website to secure direct wholesale delivery across the Pune district!