Published: 15 October 2026  |  Supplier: The Changediya Cement, Wagholi, Pune  |  Area: Phaltan MIDC, Satara

Fosroc Conbextra GP2: non-shrink precision grout for Phaltan MIDC

Fosroc Conbextra GP2 is a prepacked cementitious grouting material used for structural and industrial applications where high strength, reliable contact and controlled early-age expansion are required. According to Fosroc’s official product page, clean water is added to its ready-to-use dry powder to produce a free-flowing, non-shrink grout suitable for gaps up to 100 mm when used according to the manufacturer’s instructions.

For engineers, maintenance departments, machinery installers, EPC contractors and industrial builders working around Phaltan MIDC at Survadi, choosing the correct grout matters. An inexpensive material that does not satisfy gap, strength, flow or vibration requirements can be more costly than a properly specified precision grout. The Changediya Cement offers a practical route to request the featured ₹475* rate and compare suitable options before procurement.

Key features and practical benefits of Conbextra GP2

• Non-shrink design: the formulation uses controlled expansion to help compensate for plastic-state shrinkage and settlement in properly restrained grouting work.
• Flow characteristics: helps grout reach areas beneath machinery base plates where conventional hand-placed mortar is difficult to compact.
• High early strength: can be important when industrial projects have planned equipment-installation and commissioning windows.
• High ultimate strength: suited to demanding, appropriately engineered grouting applications.
• Prepacked consistency: helps reduce the variation introduced by mixing ordinary cement, sand and additives at a job site.
• No metallic iron: avoids iron-related staining; the manufacturer also describes chloride-free strength development.
• Contractor-friendly procurement: enquiry-based wholesale quantities allow projects to plan material, freight, taxes and delivery together.

Where contractors use Fosroc GP2 in industrial projects

Precision grouting is commonly specified where contact between an equipment base and its supporting concrete must be reliable. Applications to discuss with a structural engineer or equipment OEM include:

• Machine base plates: foundation grouting beneath industrial machinery and equipment frames.
• Pumps and compressors: selected support foundations with static or dynamic loads.
• Anchor bolts and sleeves: approved bolt pockets and installation voids.
• Precast components: selected bearing pads and connection gaps where cementitious grout is permitted.
• Industrial plants: fabrication units, utilities, factories, maintenance shutdowns, warehouses and equipment foundations.
• Concrete void filling: appropriately designed confined gaps needing pourable or flowable high-strength material.

Not an automatic replacement: GP2 should not be confused with epoxy tile grout, waterproofing membranes, resin anchors, repair mortar or structural concrete. Always match the material to the engineer-approved specification.

Technical quick reference and how to apply it correctly

The manufacturer’s current product page is the first reference for approved use. The following commonly circulated Indian GP2 technical-sheet figures are useful for preliminary planning only; the latest regional sheet and instructions printed on the delivered batch take precedence.

Suggested site procedure

1. Check specifications: confirm manufacturer variant, desired consistency, design loads, grout thickness and quantity.
2. Prepare surfaces: remove oil, laitance, loose material and debris from concrete, steel plates and bolt pockets.
3. Pre-wet concrete: achieve the prescribed saturated-surface-dry condition; do not leave standing water.
4. Seal the formwork: form a proper grout head, check leakage points and provide air-release paths.
5. Measure water accurately: add powder gradually using an appropriate powered mixer and achieve a smooth uniform mix.
6. Place continuously: pour from one side and maintain the required head, reducing trapped air and interruptions.
7. Cure properly: protect exposed grout from early drying and follow the latest Fosroc TDS and approved site method.

All six precision-grout options: wholesale price comparison

The following prices are the rates supplied for this article, not independently verified current market-wide prices. Packaging and exact grades may differ, so compare the cost per kg / wet-litre yield for the approved use before selecting a substitute.

* Quoted rates are supplier-provided article inputs, may change without notice and are not guaranteed for identical pack weights. GST & transportation extra applicable.

Which grout offers the best value?

If your project specifically calls for Fosroc Conbextra GP2, the featured ₹475* quotation is a starting point for a written wholesale enquiry. MYK Arment NS50 at ₹400* has the lowest displayed nominal rate; Dr Fixit Pidigrout 10M at ₹450* is another budget-oriented enquiry; SikaGrout-214 IN at ₹475* is a technically documented precision-grout option; and UltraTech NS2(N) ₹500* or NS2(F) ₹600* may be worth evaluation where their exact specifications fit. Price is only one part of the decision.

Ask your engineer to compare at least six parameters: grout type, bag weight, 1-/7-/28-day strength, mixing-water demand, approved thickness and wet yield. The correct product is the one that meets the specification at the lowest verified delivered project cost—not simply the cheapest number on a rate list.

Why contact The Changediya Cement, Wagholi, Pune?

The Changediya Cement, also identified on its official About Us page as Changediya Enterprises – Changediya Cement’s, is a building-material business based in Wagholi on Pune Nagar Road. Its website lists cement, construction grout, tile adhesives, waterproofing chemicals, AAC blocks and associated materials. That broader product range makes it a useful procurement enquiry point for contractors planning more than a single bag of grout.

For buyers comparing Fosroc GP2 price in Phaltan, non-shrink grout wholesalers serving Satara and construction-chemical suppliers near me, the company’s featured wholesale offer provides a direct route to discuss order quantities, dispatch and payment terms. Rather than depending on unverified claims that any supplier is the “only” or “unbeatable” dealer, ask for a written, itemised quotation so you can judge the value transparently.

Why enquiries are worthwhile: ask one team for the selected grade, your required bag count, alternative rates, a consolidated freight proposal and material availability. A clear quote reduces the risk of delays and last-minute substitutions at active industrial sites. The Changediya Cement is positioning itself as a competitive wholesale supply option for contractors in Pune, Phaltan and the wider region; compare the final offer against your project requirement.

Explore the official The Changediya Cement storefront, its About Us and building-material categories and the Fosroc Conbextra GP2 product listing for more details.

Phaltan MIDC, Survadi and nearby local-service searches

The industrial estate in Phaltan taluka is located at Survadi (also written Surawadi). If you are procuring for Phaltan MIDC, Survadi Industrial Area, Nimbhore, Kharadewadi, Pimpalwadi, Tadavale, Dhavalewadi, Kashiwadi, Fadatarwadi, Bhilkatti or other nearby work sites, send the complete destination and unload conditions to The Changediya Cement to check delivery feasibility.

Buyers elsewhere in the Phaltan region can enquire from Phaltan city, Kolki, Vidani, Rajale, Tardaf, Taradgaon, Wathar (Nimbalkar), Barad, Sastewadi, Jinti, Zirapwadi and the wider Satara district. These are locality and search-coverage references, not promises of an existing local branch or free delivery. Freight, order size and dispatch timelines depend on the exact location.

Natural search terms used by local buyers include “Fosroc Conbextra GP2 near me”, “GP2 chemical wholesaler near Phaltan MIDC”, “non shrink grout supplier Phaltan Satara”, “GP2 chemical wholesale rate Survadi”, “Fosroc grout dealer serving Phaltan”, and “cementitious precision grout for machinery foundation in Phaltan”. This page addresses those searches with product and procurement information rather than presenting a nonexistent Phaltan storefront.

How to obtain a firm wholesale quote

1. Identify the material: Fosroc Conbextra GP2 or your approved alternative brand/grade.
2. Share the quantity: number of bags, required packaging and target dispatch date.
3. Give the delivery address: industrial plot number, Phaltan MIDC/Survadi site, landmark and contact person.
4. Request the final landed rate: item price, applicable GST, transportation, unloading and any minimum-order terms.
5. Approve against specifications: obtain batch details, technical document and a written confirmation before payment.

Frequently asked questions about Fosroc Conbextra GP2

Below are practical answers covering GP2 price, specifications, grouting procedure, comparisons, wholesale orders and deliveries in Phaltan MIDC. Product-specific guidance is based on publicly accessible manufacturer information where available; check the latest technical sheet before construction use.

1. What is the quoted price of Fosroc Conbextra GP2 in Phaltan MIDC?

The featured wholesale quotation is ₹475* per quoted pack from The Changediya Cement, subject to quantity, pack size, stock and reconfirmation. GST and transportation are extra.

2. Where can I enquire about wholesale Fosroc GP2 for Phaltan?

Contact The Changediya Cement on +91 9055079555. Its physical store is on Pune Nagar Road, near BJS Campus and opposite Ganpati Vajan Kata, Wagholi, Pune 412207.

3. Is The Changediya Cement physically located in Phaltan MIDC?

No. The supplier is based in Wagholi, Pune, and invites enquiries for delivery to Phaltan MIDC and the surrounding Satara district. Confirm dispatch availability and transport terms before ordering.

4. Can I request delivery of GP2 to Survadi industrial estate?

Yes, request a transport-inclusive quotation for a site in Survadi/Phaltan MIDC. Delivery service, minimum quantity, vehicle access and dates must be confirmed with the supplier.

5. Can I buy GP2 near me in Phaltan?

If you are searching for “Fosroc GP2 near me” in Phaltan, request a quotation from The Changediya Cement for the supply address. Its shop is in Wagholi rather than Phaltan, so delivery arrangements matter.

6. What is Fosroc Conbextra GP2?

It is a factory-prepacked, cement-based non-shrink precision grout. Clean water is added to form a pourable or free-flowing grout for suitable construction and industrial applications.

7. What does non-shrink grout mean?

Non-shrink grout is formulated to compensate for early-age settlement or shrinkage under controlled placement conditions, helping maintain contact with the bearing surface. It does not mean normal workmanship or curing can be ignored.

8. What are the main uses of Conbextra GP2?

Typical uses include machine base plates, industrial equipment foundations, bearing areas, anchor-bolt pockets, concrete repair voids and selected precast connections where a high-strength flowing grout is specified.

9. Is GP2 suitable for machinery foundation grouting?

Yes, machine foundations and base plates are common applications, subject to the engineer’s specification, equipment loads, vibration characteristics and approved installation method.

10. Can Fosroc GP2 be poured under steel base plates?

Yes. Its flow properties can help fill gaps beneath steel base plates. Ensure adequate formwork, air-release arrangements, a continuous pour and the specified head pressure.

11. Can it be used around anchor bolts?

It may be used for suitable anchor pockets and fixing applications when the design and technical data sheet permit. Clean out debris and standing water before grouting.

12. What is the maximum single-pour thickness?

Fosroc describes Conbextra GP2 for grouting gaps up to 100 mm. Thicker placements require design review and may need an approved aggregate extension or a different product.

13. How much water should I use with a 25 kg bag?

An Indian GP2 technical sheet gives about 4.125 L for pourable consistency and 4.50 L for flowable consistency per 25 kg. Check the technical sheet on the delivered bag before mixing.

14. Can extra water be added to improve flow?

Do not exceed the manufacturer’s stated water dosage. Uncontrolled extra water may change strength, stability and shrinkage behavior. Choose the approved consistency instead.

15. How is Fosroc Conbextra GP2 mixed?

Use measured clean water and suitable mechanical mixing, add the powder gradually, and mix until uniform. A commonly circulated Indian GP2 sheet specifies about five minutes; always use current pack instructions.

16. How soon should mixed GP2 be placed?

Place promptly. An Indian GP2 technical sheet advises placement within approximately 20 minutes at 30°C to benefit from the expansion mechanism; high site temperatures can alter workability.

17. Does GP2 require curing?

Yes. Protect exposed surfaces against rapid drying and cure according to the current Fosroc technical data sheet and the site specification.

18. Is Conbextra GP2 chloride-free?

Fosroc states that Conbextra GP2 develops early strength without chlorides and contains no metallic iron that could cause staining. Consult the manufacturer’s document for the complete declaration.

19. What compressive strength can Conbextra GP2 reach?

An Indian GP2 data sheet reports typical laboratory values around 65 MPa at 28 days for flowable and 68 MPa for pourable consistency. These are illustrative data-sheet values, not a guaranteed site result.

20. Is Fosroc Conbextra GP2 the same as Conbextra GP?

No. They are different Fosroc product variants with different intended specifications. Do not substitute one for the other without verifying the design and the current product sheets.

21. Can I use GP2 instead of cement and sand mortar?

For specified precision-grouting applications, GP2 offers controlled characteristics that ordinary site-mixed mortar may not provide. It is not a universal replacement for mortar in every construction task.

22. Is GP2 suitable for tile joints?

No. Fosroc GP2 is an industrial precision grout; choose a dedicated tile grout for joints between tiles.

23. Is GP2 a waterproofing chemical?

GP2 is primarily a cementitious non-shrink grout, not a standalone waterproofing membrane. Use a separately designed waterproofing system where one is required.

24. Can GP2 be pumped?

Some larger grouting works can use appropriate pumping equipment. Pump selection, mixing capacity, grout flow and placement technique must follow manufacturer guidance.

25. What precautions should be taken before placing grout?

Clean the concrete and steel contact surfaces, remove weak laitance and contaminants, pre-wet concrete as directed, remove standing water, seal the formwork and provide air vents.

26. How do I estimate the quantity of GP2 bags?

Calculate net void volume in litres from measured dimensions, then divide by the wet yield in litres per bag stated on the current manufacturer sheet. Allow for site wastage and formwork losses.

27. What pack sizes are available?

Fosroc pack sizes can vary by market and batch. Confirm the quoted bag weight, manufacturing date and packaging on the supply quotation before comparing rates.

28. What is the shelf life of Fosroc Conbextra GP2?

Follow the expiry or best-before information on the actual pack and the latest technical sheet. Keep unopened bags dry, off the floor and protected from moisture.

29. Which product is the cheapest in the quoted comparison?

MYK Arment NS50 is the lowest listed price at ₹400*. Prices alone are not a measure of equivalent bag weight or technical suitability.

30. Is Dr Fixit Pidigrout 10M an alternative?

It is included in this supplier’s requested shortlist at ₹450*. Review the current product data sheet for application, gap size, strength and packaging before treating it as interchangeable with GP2.

31. Is SikaGrout-214 IN a comparable option?

Sika positions SikaGrout-214 IN as a non-shrink, cementitious precision grout for engineering applications. Its quoted rate here is ₹475*, but the official Sika page describes a 30 kg bag, so compare like-for-like quantities.

32. What is the difference between UltraTech NS2(N) and NS2(F)?

They are listed as separate offered variants at ₹500* and ₹600*. Ask for the exact current UltraTech data sheets and confirm the variant, flow or consistency requirement and bag weight rather than guessing from the suffix.

33. Can I get a bulk order rate for 50 or 100 bags?

Request a written project quotation stating the exact grade, pack weight, quantity, destination, taxes, freight, lead time and payment terms. Larger quantities may qualify for a negotiated quote.

34. Is GST included in the stated rates?

No. The prices are marked with an asterisk because GST and transportation are extra applicable. Confirm the applicable tax and total invoice amount before purchase.

35. Which locations around Phaltan can enquire for supply?

Enquiries are welcome from Phaltan MIDC/Survadi, Nimbhore, Kharadewadi, Pimpalwadi, Tadavale, Kolki, Vidani, Rajale, Taradgaon and other Phaltan or Satara sites, subject to logistics confirmation.

36. How do I contact The Changediya Cement immediately?

Call or WhatsApp +91 9055079555 with the product name, quantity, pack size and full delivery location. You can also visit the supplier’s official online GP2 listing.

37. Does any supplier guarantee the lowest GP2 price in Maharashtra?

Market-wide lowest-price or exclusivity claims require independent verification. Compare written, tax-and-freight-inclusive quotations for the same genuine product, grade and pack size. The Changediya Cement welcomes wholesale enquiries.

Explore verified product and supplier resources

• Fosroc – official Conbextra GP2 overview and data-sheet access (manufacturer source).
• Sika India – official SikaGrout-214 IN specification (alternative manufacturer source).
• Zilla Parishad Satara – Phaltan taluka profile (location reference).
• The Changediya Cement – Fosroc Conbextra GP2 online product page (internal product link).
• The Changediya Cement – company profile (internal company link).

Final buying tip: For a machinery-foundation or construction-grouting job in Phaltan MIDC, contact The Changediya Cement now to explore the featured Fosroc Conbextra GP2 quotation, request the full delivered rate, verify genuine stock and compare approved alternatives.

Explore this guide GP2 overviewFeatures & benefitsIndustrial usesSpecifications & mixingCompare six productsWhy this supplier?Nearby areas & “near me”How to order37 FAQsAddress & contact

---

Featured quotation

₹475*

WhatsApp a Quote

Not a walk-in store in Phaltan. Wagholi-based supplier; confirm delivery.