MYK SUPERSET 300ml Wholesale Price Pune – ₹150*

The Changediya Cement advertises MYK LATICRETE SUPERSET 300ml at ₹150* per bottle.

This advertised offer helps builders, tile contractors and construction-material buyers compare cement slurry additive prices throughout Pune City, PCMC and Pune Rural.

SUPERSET is designed for traditional wet-on-wet floor tiling over suitable cement-based concrete and mortar beds.

It should not be confused with a modern cementitious thin-set adhesive, a ready-to-use tile glue, silicone sealant, epoxy grout or waterproofing membrane.

The correct purchase decision should take into account the tile type, wet mortar bed, cement consumption, installation area, substrate conditions and project specifications.

MYK LATICRETE SUPERSET 300ml Technical Specifications

Official MYK LATICRETE reference: SUPERSET Cement Additive Product Page .

What Is MYK LATICRETE SUPERSET 300ml?

MYK SUPERSET is a polymer-based liquid concentrate added to cement slurry used in traditional floor tile installation.

The product is first mixed into clean water and then used with Portland cement to prepare an enhanced bonding slurry.

Its macromolecule-based formulation is intended to increase the adhesion, workability and usable time of conventional cement slurry.

What Is a Cement Slurry?

Cement slurry is a fluid mixture of cement and water used, among other purposes, in traditional tile-laying methods.

In wet-on-wet floor installation, slurry helps bond tiles or stones to the fresh mortar bed.

Why Add SUPERSET to Cement Slurry?

Plain cement slurry may have limitations in bonding certain floor tiles and stones.

SUPERSET introduces polymer components that improve the manufacturer's stated slurry adhesion properties.

Is SUPERSET a Tile Adhesive?

SUPERSET is a cement slurry enhancer.

It does not independently act as a complete ready-made adhesive. It must be mixed with the specified water and cement.

12 Benefits of MYK SUPERSET 300ml Cement Slurry Enhancer

1. Improved Slurry Adhesion

The manufacturer reports higher bond strength than conventional plain cement slurry.

2. Polymer-Enhanced Cement Bonding

The formulation adds macromolecule-based polymers to a traditional slurry system.

3. Self-Curing Slurry Properties

The manufacturer states that its enhanced slurry does not require separate conventional water curing.

4. Improved Workability

The liquid additive is designed to support a smoother, more workable slurry.

5. Greater Adjustability

The manufacturer identifies improved open and adjustment time as key features.

6. Suitable for Traditional Wet-on-Wet Tiling

Developed specifically for cement slurry applications over fresh mortar beds.

7. Applicable to Ceramic Tiles

Compatible ceramic floor tiles are among the intended uses.

8. Applicable to Vitrified Tiles

The manufacturer also identifies appropriate vitrified floor tiles.

9. Natural Stone Applications

Selected natural stone flooring can be installed using approved SUPERSET slurry methods.

10. Indoor and Outdoor Floor Systems

Appropriate interior and exterior floor installations are covered by the manufacturer guidance.

11. Convenient 300ml Dosage

One bottle is recommended for one 50kg bag of cement.

12. Competitive Wholesale Price

The Changediya Cement advertises the 300ml bottle at just ₹150*.

MYK SUPERSET 300ml Mixing Ratio

The manufacturer's reference mixing proportion is:

The technical data sheet allows the water quantity to be adjusted for workable consistency, up to a stated maximum of 30 litres per 300ml additive dose.

Water should not be increased indiscriminately. Excess water can affect the quality of a cement-based slurry and installation.

Step-by-Step Mixing Instructions

1. Use clean potable water and a clean mixing container.
2. Shake the SUPERSET bottle thoroughly before opening.
3. Measure approximately 20 litres of clean water.
4. Add the complete 300ml bottle to the water.
5. Mix thoroughly to disperse the additive.
6. Allow approximately 5–10 minutes as recommended by MYK LATICRETE.
7. Add the prepared liquid to the intended 50kg cement quantity.
8. Mix by hand or with a slow-speed mixer until workable and uniform.
9. Adjust water only within the manufacturer's permitted limits.
10. Apply the slurry using the specified traditional wet-on-wet procedure.

Mixing warning: Do not replace this procedure with a random additive dosage, and do not use SUPERSET as an unmixed stand-alone tile glue.

How to Use MYK SUPERSET for Floor Tile Installation

Step 1 – Inspect the Floor Substrate

Confirm the underlying floor is stable, structurally sound and capable of supporting the tile or stone finish.

Step 2 – Prepare the Surface

Remove dust, loose material, oil, grease, laitance and incompatible coatings.

Step 3 – Check Concrete Age

The manufacturer requires new concrete slabs to be appropriately cured and generally at least 28 days old before installation.

Step 4 – Dampen Dry Substrates

Where instructed, dampen dry concrete or masonry, then remove excess surface water.

Step 5 – Prepare the Mortar Bed

Construct the specified cement mortar levelling bed for the wet-on-wet method.

Step 6 – Shake the Additive

Shake the SUPERSET container to ensure a uniform liquid.

Step 7 – Mix Into Water

Combine 300ml SUPERSET with approximately 20 litres of clean water.

Step 8 – Allow Dispersion Time

Wait approximately 5–10 minutes as stated by the manufacturer.

Step 9 – Mix With Cement

Prepare enhanced slurry using the appropriate 50kg cement quantity.

Step 10 – Apply the Slurry

Use the flat side of a trowel to press the slurry into the prepared mortar bed.

Step 11 – Work in Small Areas

The technical sheet recommends spreading only as much slurry as can be covered with tiles in about 10 minutes.

Step 12 – Back-Butter Larger Tiles

For tiles larger than 12 × 12 inches, the manufacturer recommends back-buttering to help achieve complete bedding.

Step 13 – Lay Tiles Into Wet Slurry

Install tiles while the slurry remains wet and sticky.

Step 14 – Embed and Level

Use appropriate tiling tools to embed tiles and adjust their level.

Step 15 – Maintain Joint Spacing

Provide grout joints and required movement joints according to the installation design.

Step 16 – Protect the New Floor

At normal temperatures, the manufacturer recommends protecting the work overnight. Longer protection may be necessary in cold conditions.

Step 17 – Allow Time Before Grouting

The technical sheet specifies at least 24 hours before grouting at approximately 21°C.

Step 18 – Follow the Complete Floor System

Use appropriate grout, movement-joint sealants and waterproofing where required.

MYK SUPERSET for Ceramic and Vitrified Floor Tiles

SUPERSET is formulated to enhance traditional cement slurry bonding used in ceramic and vitrified floor tile installation.

The product can be relevant for housing projects, bungalow floor tiling, residential renovations and other approved flooring work.

Can SUPERSET Fix Large Vitrified Tiles?

The manufacturer includes vitrified tiles within its application scope and describes back-buttering larger tiles.

However, tile size, substrate, required adhesive coverage and movement conditions must be checked.

Many modern large-format tiles are better installed with a manufacturer-approved thin-set tile adhesive.

Is It Suitable for Wall Tiles?

The official SUPERSET product is primarily specified for traditional wet-on-wet floor applications.

Do not assume it is an appropriate wall tile adhesive.

MYK SUPERSET for Natural Stone Flooring

The manufacturer also lists selected natural stone floor installations within the product's intended use.

The company's specifications recommend white cement for white or light-coloured natural stones, and grey cement for dark stones and suitable tiles.

Actual stone compatibility depends on moisture sensitivity, backing, thickness, appearance and installation method.

Can It Be Used for Italian Marble?

Not every marble is suitable for a traditional wet-bed cement slurry installation.

Moisture-sensitive or translucent marble may require a specialist adhesive system.

For premium stone projects, obtain written compatibility guidance before use.

Can It Replace Mechanical Stone Anchors?

No. SUPERSET is a cement slurry additive. It does not replace structural fixings or engineered stone anchors.

MYK SUPERSET vs Plain Cement Slurry

These figures describe the manufacturer's comparison testing. They should not be presented as guaranteed results for every construction site.

SUPERSET does not make every tile installation twice as strong. Actual performance depends on the tile, substrate, slurry preparation and workmanship.

MYK SUPERSET vs Modern Thin-Set Tile Adhesives

MYK LATICRETE advises that a cured mortar bed followed by a suitable thin-set tile adhesive generally provides the preferred installation method.

SUPERSET is an option for enhancing a traditional slurry method when that method is appropriate.

MYK SUPERSET 300ml Coverage – How Much Area Does One Bottle Cover?

The official dosage is based on cement quantity, not a guaranteed floor area.

One 300ml bottle is intended for one 50kg cement bag.

The actual square-foot floor coverage depends on:

• Tile length and width
• Mortar bed thickness
• Level of the substrate
• Slurry consumption
• Mixing proportions
• Application losses
• Tile back-buttering requirements

The manufacturer's technical sheet does not establish one universal square-foot coverage number.

Dosage Planning Chart

These examples assume the manufacturer-standard 300ml per 50kg dosage.

Cement, sand, labour, GST and transportation are not included in these additive costs.

MYK SUPERSET 300ml vs 900ml

Three separate 300ml bottles have an advertised base cost of ₹450*.

Buyers can compare this figure with the current 900ml pack quotation to determine which packaging suits their project.

The 900ml pack should be measured and proportioned correctly if only part of it is required.

Is MYK SUPERSET Waterproofing?

No. SUPERSET is primarily a cement slurry bonding enhancer.

The manufacturer describes lower water absorption and self-curing properties for its enhanced slurry.

However, those properties do not convert the product into a waterproofing membrane.

For bathrooms, balconies, wet areas or other projects requiring waterproofing, use an approved waterproofing system independently.

Why Choose The Changediya Cement for MYK SUPERSET 300ml?

When purchasing cement additives, buyers should compare the exact product, current price, sealed packaging, batch details, manufacturer guidance and final delivered cost.

The Changediya Cement, Wagholi, Pune offers a local wholesale enquiry option for MYK LATICRETE SUPERSET and related construction materials.

1. Attractive ₹150* Price

The published rate provides a clear quotation reference.

2. Convenient Wagholi Location

Located opposite Ganpati Vajan Kata, near BJS College on Pune Nagar Road.

3. Cement Additive Enquiries

Customers can enquire about SUPERSET for traditional wet-on-wet flooring.

4. Bulk Contractor Quotations

Builders, tile contractors and procurement teams can request quantities.

5. Product Pack Comparison

Buyers can compare 300ml and 900ml SUPERSET requirements.

6. Direct Phone Contact

Customers can call to check stock, packaging and price.

7. WhatsApp Enquiries

Send quantities and site location to request a quotation.

8. Pune City Enquiries

Customers from Pune City can contact the business.

9. PCMC Enquiries

Buyers from Pimpri, Chinchwad, Wakad, Moshi and Bhosari can enquire about supply.

10. Pune Rural Enquiries

Customers from Chakan, Shirur, Ranjangaon, Baramati and other areas can request quotations.

11. Related Building Materials

The Changediya Cement features cement, tile adhesives, grouts and other products.

12. Complete Quotation Requests

Ask for product cost, GST, transportation and delivery arrangements.

Looking for MYK SUPERSET 300ml at a wholesale rate in Pune? Explore The Changediya Cement's ₹150* offer and contact now.

MYK SUPERSET Wholesale Enquiries Across Pune City, PCMC and Pune Rural

The Changediya Cement welcomes wholesale enquiries from customers across Pune district.

The following localities are useful for buyers searching for MYK LATICRETE SUPERSET, cement slurry enhancer and floor tile installation chemicals near their project.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Wadgaon Sheri, Lohegaon, Dhanori, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand, Perne, Tulapur, Awhalwadi and surrounding areas.

Central Pune

Pune Station, Camp, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth, Ganj Peth, Market Yard, Mukund Nagar and Salisbury Park.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi and Wadki.

Pimpri-Chinchwad (PCMC)

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road, Nashik Phata and Bopodi.

Pune Nagar Road and Shirur Belt

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Ranjangaon MIDC, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon and Pimpale Jagtap.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Kanhe, Kamshet, Lonavala, Malavli, Karla and nearby locations.

Pune Rural Talukas

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon.

Pune Rural Towns and Villages

Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe and neighbouring villages.

Searching for MYK SUPERSET 300ml in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati, Junnar, Indapur or Pune Rural? Contact The Changediya Cement to request current wholesale pricing.

MYK SUPERSET 300ml Bulk Wholesale Price Chart

The following calculations use the advertised ₹150* per 300ml bottle rate.

These are illustrative base-price calculations, not confirmed bulk-discount tiers.

Cement, sand, site labour, GST and transportation are additional.

For large construction projects, request an updated written wholesale quotation.

How to Order MYK SUPERSET 300ml at ₹150*

1. Explore the product: Review the official SUPERSET information.
2. Confirm the application: Check that the intended system is traditional wet-on-wet floor tile installation.
3. Estimate cement consumption: Determine the number of 50kg cement bags required.
4. Calculate additive quantity: Use the standard 300ml per 50kg cement dosage.
5. Choose the pack: Compare 300ml and 900ml options.
6. Contact now: Call The Changediya Cement at 9055079555.
7. Specify the product: Request MYK LATICRETE SUPERSET 300ml.
8. Share the quantity: State how many bottles are required.
9. Share the site location: Provide your Pune City, PCMC or Pune Rural address.
10. Confirm the price: Request the current ₹150* quotation.
11. Check additional charges: Ask about GST and transportation.
12. Verify the bottle: Check original sealed packaging and batch information.
13. Place the order: Confirm the final quotation and delivery or collection terms.

40 Frequently Asked Questions About MYK SUPERSET 300ml

Explore Related MYK LATICRETE Products and Building Materials

The Changediya Cement's product catalogue includes SUPERSET and related construction materials.

• Explore The Changediya Cement Website
• Explore MYK SUPERSET 300ml ₹150* Wholesale Listing
• Explore MYK SUPERSET 900ml
• Explore MYK LATICRETE 335 Super Flex Grey
• Explore MYK LATICRETE 325 High Flex Grey
• Explore MYK SP-100 DUO Epoxy Grout
• Explore Other Construction Materials

Customers can also enquire about cement, tile adhesives, epoxy grout, tile cleaning products, waterproofing chemicals, concrete cover blocks and other building materials.

Official MYK LATICRETE Technical References

• MYK LATICRETE SUPERSET Official Product Page
• SUPERSET November 2024 Technical Data Sheet
• MYK SUPERSET Mixing and Installation Specification
• Explore MYK LATICRETE Cement Additives
• Bureau of Indian Standards

Refer to the latest manufacturer instructions for dosage, surface preparation, mixing, application, curing and safety.

Get MYK SUPERSET 300ml at ₹150* in Pune

If you are comparing MYK LATICRETE SUPERSET 300ml wholesale prices in Pune, The Changediya Cement offers a Wagholi-based quotation option at the advertised ₹150* per bottle.

Whether your site is in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati, Junnar, Indapur or another Pune district location, contact the supplier with your requirements.

Explore MYK SUPERSET 300ml, contact The Changediya Cement now, check current stock and request a wholesale quotation.