MYK Laticrete 335 Grey 20kg Wholesale Price Pune – ₹900*

The Changediya Cement's online product listing advertises MYK LATICRETE 335 Super Flex Grey at ₹900* per 20 kg bag.

For projects requiring a higher-performance adhesive, buyers should evaluate the product's suitability rather than looking at the bag price alone.

LATICRETE 335 Super Flex offers performance characteristics relevant to approved large-format tile, natural stone, exterior and wet-area installations. Such applications may demand greater flexibility and movement accommodation than ordinary economy interior tile adhesives.

The Changediya Cement, located opposite Ganpati Vajan Kata near BJS College on Pune Nagar Road, Wagholi, provides a local wholesale enquiry contact for construction buyers from Pune City, PCMC and Pune Rural.

Buyers can contact the business to discuss order quantity, packaging, current price, stock and transportation.

MYK LATICRETE 335 Super Flex Grey – Product Specifications

Official manufacturer reference: MYK LATICRETE 335 Super Flex – September 2025 Technical Data Sheet .

Important: The latest September 2025 technical sheet lists 70–80 sq. ft. coverage, while some older manufacturer literature lists 55–60 sq. ft. Coverage estimates and all technical figures should be checked against the current product packaging and application conditions.

What Is MYK LATICRETE 335 Super Flex Grey?

MYK LATICRETE 335 Super Flex Grey is a high-performance, highly polymer-modified cementitious adhesive developed for approved ceramic tiles, vitrified tiles, glass mosaics and natural stone installations.

It is supplied in powder form and mixed with clean water according to the manufacturer's instructions.

The product is designed for demanding approved interior and exterior floor and wall tiling systems, where improved adhesion, flexibility and movement accommodation can be important.

Compared with conventional rigid site-mixed cement mortars, a properly specified flexible tile adhesive can offer benefits where temperature variations, substrate movement and installation conditions create additional demands.

What Does C2TES1 Mean?

• C2: Improved cementitious tile adhesive.
• T: Reduced-slip performance.
• E: Extended open time.
• S1: Deformable adhesive classification.

The S1 classification indicates that the adhesive meets the relevant transverse-deformation requirements under the applicable EN/ISO test method.

The September 2025 technical sheet reports transverse deformation in the S1 range, rather than treating the adhesive as completely rigid.

What Does Type 3TS1 Mean?

Under IS 15477:2019, Type 3TS1 represents the manufacturer's declared Indian standard classification, incorporating reduced-slip and deformability performance.

Neither classification removes the need for properly designed substrates, waterproofing, expansion joints or structural approvals.

Explore the official product information: MYK LATICRETE 335 Super Flex Manufacturer Page .

12 Important Benefits of MYK LATICRETE 335 Super Flex Grey

1. Super-Flexible S1 Classification

The S1 classification identifies measured deformability, which can be useful where a suitable tile installation must accommodate limited movement.

2. High Polymer Modification

The manufacturer's highly polymer-modified formulation is designed for improved bonding and installation performance.

3. Suitable for Approved Large-Format Tiles

The manufacturer specifically identifies large-format tile and natural stone applications, subject to size, weight, substrate and installation requirements.

4. Improved C2 Adhesion Class

The product's C2TES1 classification includes improved cementitious adhesion performance.

5. Interior and Exterior Applications

MYK LATICRETE lists suitable interior and exterior floor and wall installations.

6. Wet-Area Applications

Its application scope includes approved swimming pools, washrooms, saunas and other water-exposure environments when the complete system is correctly specified.

7. Reduced Slip

The T classification identifies reduced-slip performance, valuable when installing suitable tiles on vertical surfaces.

8. Extended Open Time

A typical 30-minute open time under standard test conditions gives installers additional placement flexibility.

9. Suitable Glass Mosaic Applications

The manufacturer includes paper-faced glass mosaic tile systems, with specified bedding and application instructions.

10. Tile-on-Tile Renovation Compatibility

The product may be used on selected existing ceramic or vitrified tiles after proper substrate verification and preparation.

11. Water and Shock Resistance

The manufacturer's product literature identifies water and shock resistance as benefits when the adhesive is used within its approved installation system.

12. Competitive ₹900* Wholesale Offer

The Changediya Cement's advertised ₹900* per 20 kg bag rate gives Pune contractors and construction buyers a clear supplier quotation to compare.

Where Can MYK LATICRETE 335 Grey Be Used?

The manufacturer describes a broad range of approved floor, wall and tile/stone installation applications.

Typical Suitable Applications

• Residential and commercial ceramic tile flooring
• Approved vitrified and porcelain tile installations
• Selected large-format tile installations
• Interior ceramic and vitrified wall tiles
• Exterior floor tile installations
• Approved exterior wall tiling
• Selected natural stone installations
• Paper-faced glass mosaic systems
• Precast terrazzo tile installation
• Swimming pool tiling systems
• Bathroom and shower-area tiling
• Saunas and water-feature tiling
• Commercial lobby flooring
• Hotel and office tiling
• Selected tile-on-tile renovations
• Concrete and concrete masonry
• MIVAN, VDF and Tremix concrete where approved
• Cement mortar beds and cement plaster
• Approved cement backer boards
• Suitable gypsum and calcium silicate boards under specified conditions

Situations Requiring Additional Technical Assessment

• High-rise facade cladding
• Extremely large or unusually heavy stone slabs
• Mesh-backed or resin-backed tiles
• Engineered stone and agglomerated quartz
• Translucent or moisture-sensitive natural stone
• Direct plywood and wood substrate applications
• Highly unstable or structurally defective substrates
• Installations without required movement joints
• Swimming pools without a complete approved waterproofing system
• Critical facade applications requiring mechanical anchoring

Technical caution: For large-format tile or stone installations on exterior surfaces, the manufacturer advises contacting MYK LATICRETE technical services. Exterior cladding safety must also be reviewed by a qualified project engineer where applicable.

MYK Laticrete 335 Super Flex for Large-Format Tiles

Large-format tiles and stones can create different installation requirements from smaller conventional ceramic tiles.

Their size, weight, back profile and thermal movement influence adhesive contact requirements and the choice of installation system.

The manufacturer describes MYK LATICRETE 335 Super Flex as a high-polymer adhesive suitable for approved large-format tile and stone applications.

Its S1 deformability classification may be particularly relevant when the tile assembly requires a specified degree of flexibility.

Important Large-Format Installation Considerations

• Check tile dimensions and weight.
• Ensure the substrate meets the required flatness tolerances.
• Use the correct trowel size.
• Back-butter large-format tiles when required.
• Verify the necessary adhesive contact coverage.
• Provide appropriate grout and movement joints.
• Confirm exterior installation limitations.
• Obtain structural approval for critical high-level installations.

The manufacturer's technical sheet recommends back-buttering tiles larger than 12 inches × 12 inches to help achieve full bedding and support.

Important distinction: LATICRETE 335 Super Flex and LATICRETE 335 Maxi are different products. The correct product should be selected according to project requirements and the relevant technical data sheet.

MYK Laticrete 335 Grey for Swimming Pools and Wet Areas

The manufacturer's product information includes suitable wet-area applications such as swimming pools, saunas, water features and washrooms.

The adhesive is described as having good underwater shear-bond properties, but this does not mean that the adhesive itself provides the required pool waterproofing.

A swimming pool tile system typically requires suitable concrete preparation, waterproofing, compatible adhesive, appropriate grout and engineered movement joints.

Before choosing the product for submerged conditions, obtain a complete approved system specification from MYK LATICRETE.

Glass Mosaic Installation

For paper-faced glass mosaics, the manufacturer describes using a suitable small-notched trowel to provide a comparatively thin, even bedding layer.

The technical data sheet also distinguishes paper-faced mosaics from resin or mesh-backed mosaics. It recommends resin-based adhesive for certain mesh-backed glass mosaics rather than ordinary cementitious adhesive.

Always inspect the mosaic's mounting method before choosing the adhesive.

MYK Laticrete 335 Grey Coverage Per 20kg Bag

According to the September 2025 MYK LATICRETE 335 Super Flex technical data sheet, approximate coverage is 70–80 square feet per 20 kg bag with a 6 mm × 6 mm square-notched trowel and an average 3 mm bed.

This is an estimated figure, not a guaranteed site yield.

Actual coverage depends on:

• Tile size and tile-back shape
• Surface evenness
• Trowel notch dimensions
• Adhesive bed thickness
• Required bond contact
• Back-buttering requirements
• Installation technique
• Material wastage

Estimated Material Requirement at ₹900* Per Bag

The calculations round up to full bags and exclude additional wastage, GST and transportation.

For large-format tiles and exterior stone installations, site consumption may be higher because bedding and contact requirements differ from the assumptions used for standard coverage.

Explore the MYK LATICRETE Adhesive Coverage Calculator .

How to Apply MYK LATICRETE 335 Super Flex Grey

Step 1 – Verify the Installation Requirements

Check tile or stone type, dimensions, substrate, indoor or outdoor exposure, installation height and movement-joint requirements.

Step 2 – Prepare the Substrate

Ensure the substrate is structurally sound, sufficiently cured, clean and free from dust, grease, oil, loose paint, laitance and incompatible coatings.

Step 3 – Check Surface Flatness

Correct major surface irregularities using a suitable screed or levelling material before tiling.

Step 4 – Measure Clean Water

The September 2025 technical sheet specifies approximately 5.5–6 litres of clean water per 20 kg bag for the Grey variant.

Step 5 – Mix Thoroughly

Add the adhesive powder into the measured water and mix using appropriate equipment until a smooth, workable consistency is obtained.

Step 6 – Allow Slaking

The manufacturer specifies a slaking period of approximately 5–10 minutes, followed by remixing before application.

Step 7 – Apply With a Suitable Trowel

Spread the adhesive using the flat side of the trowel and then comb additional material with the notched side.

Step 8 – Apply Only a Manageable Area

The technical sheet recommends spreading only as much adhesive as can be covered with tile in about 10 minutes, despite its longer laboratory-rated open time.

Step 9 – Position and Bed the Tiles

Place tiles into fresh adhesive. Press firmly and use back-buttering for large-format tiles where required.

Step 10 – Verify Contact Coverage

Periodically lift tiles to check adhesive transfer and full bedding.

Step 11 – Maintain Grout and Movement Joints

Provide appropriate joints around tile perimeters and carry structural expansion joints through the tiling.

Step 12 – Allow Appropriate Curing

Protect the installation from premature loads and environmental exposure. The manufacturer specifies at least 24 hours before grouting at approximately 21°C under suitable conditions.

Installation reminder: Adhesive that has skinned over must not be reactivated by sprinkling water. Remove the unsuitable material and apply fresh adhesive in accordance with the manufacturer's instructions.

MYK LATICRETE 325 High Flex vs 335 Super Flex

The most important technical distinction in the referenced data sheets is the S1 deformability classification of LATICRETE 335 Super Flex.

If the installation requires a specified degree of movement accommodation, this may be relevant. However, a structural engineer or qualified specifier should still confirm the complete tile assembly.

Why Choose The Changediya Cement for MYK Laticrete 335 Grey?

When searching for an adhesive wholesaler, buyers should compare material authenticity, suitability, advertised price, final delivered cost, stock availability and supplier communication.

The Changediya Cement, Wagholi, Pune, is a building materials wholesale business with a published MYK LATICRETE 335 Super Flex Grey listing at ₹900.

1. Competitive ₹900* Wholesale Offer

The advertised ₹900* per 20 kg bag price gives builders, contractors and homeowners a concrete wholesale quotation option.

2. Wagholi Location on Pune Nagar Road

The business is situated opposite Ganpati Vajan Kata, near BJS College, making it a practical contact for buyers from Wagholi, Kharadi, Lonikand, Chandan Nagar and Shikrapur.

3. Enquiries for Bulk Construction Projects

Residential and commercial contractors can request quotations based on the bag quantity needed for their projects.

4. Multiple Tile Adhesive Grades

The Changediya Cement features different MYK LATICRETE adhesives, making it possible to enquire about the appropriate grade for different tiling conditions.

5. Direct Phone and WhatsApp Communication

Customers can discuss product quantities, current rates, stock availability, delivery timelines and transport.

6. Pune City, PCMC and Pune Rural Enquiries

The Changediya Cement welcomes enquiries from residential, commercial and industrial construction locations throughout Pune district.

7. Useful for Material Budgeting

A clear ₹900* base price can help contractors develop preliminary estimates before finalising procurement.

8. Related Construction Material Products

Customers can explore cement, waterproofing chemicals, grouts and other building materials listed by the business.

9. Relevant for Demanding Tiling Projects

The product's technical characteristics make it worth evaluating for approved large-format tile, exterior wall, natural stone and wet-area projects.

10. Straightforward Quotation Enquiries

Buyers can share the product variant, quantity and project location and request a written offer from the Wagholi supplier.

Planning a high-performance tiling project in Pune? Explore The Changediya Cement's MYK LATICRETE 335 Super Flex Grey offer and contact the business for the current wholesale quotation.

MYK Laticrete 335 Grey Wholesale Enquiries Across Pune District

The Changediya Cement welcomes enquiries for MYK LATICRETE 335 Super Flex Grey from Pune City, Pimpri-Chinchwad and Pune Rural. Confirm delivery feasibility and freight for your specific location.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Vadgaon Sheri, Lohegaon, Dhanori, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand and Perne.

Central Pune

Camp, Pune Station, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth, Ganj Peth and adjoining areas.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk, Marunji and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi and Wadki.

Pimpri-Chinchwad (PCMC)

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road and Nashik Phata.

Pune Nagar Road and Shirur Belt

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon, Pimpale Jagtap and surrounding villages.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Dehu Road, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Talegaon Dabhade, Vadgaon Maval, Kanhe, Kamshet, Lonavala, Malavli, Karla and surrounding locations.

Pune Rural Talukas and Towns

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon talukas, including Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe and nearby villages.

Searching for MYK LATICRETE 335 Super Flex Grey in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Chakan, Moshi, Pimpri, Chinchwad, Talegaon, Shirur, Ranjangaon, Baramati, Saswad or Pune Rural? Contact The Changediya Cement for your wholesale enquiry.

These locality names indicate wholesale enquiry coverage. Actual delivery service, order size, freight and stock must be confirmed with the supplier.

MYK LATICRETE 335 Grey 20kg Bulk Wholesale Price Chart

The following illustrative values use the advertised ₹900* per 20 kg bag rate, excluding applicable GST and transportation.

The table does not imply guaranteed bulk discounts. For project-specific quantities, request a current written quotation showing taxes and transport separately.

How to Order MYK LATICRETE 335 Grey at ₹900*

1. Explore the product: Review the manufacturer's 335 Super Flex technical information.
2. Check your project: Confirm tile type, tile size, substrate, exposure and movement requirements.
3. Estimate bag quantity: Use tile area and the appropriate adhesive coverage estimate.
4. Contact now: Call The Changediya Cement at 9055079555.
5. Share the delivery location: Mention your construction site in Pune City, PCMC or Pune Rural.
6. Request wholesale pricing: Confirm the ₹900* offer, GST, freight and minimum quantity.
7. Verify packaging: Check the correct 335 Super Flex Grey 20 kg variant and manufacturing information.
8. Confirm your order: Review the quotation and delivery terms before purchase.

35 Frequently Asked Questions About MYK LATICRETE 335 Grey

Explore Related MYK LATICRETE Products and Building Materials

The Changediya Cement's website includes a range of tile adhesives, construction chemicals and other building materials.

• Explore The Changediya Cement Website
• Explore MYK LATICRETE 335 Super Flex Grey ₹900
• Read About MYK LATICRETE 335 Grey Super Flex
• Explore MYK LATICRETE 325 High Flex Grey
• Explore Other Construction Materials
• About The Changediya Cement

Customers may also enquire about MYK LATICRETE 303, 305, 307, 313, 315 Plus, 325 High Flex, 335 Super Flex, 335 Maxi, tile grout, epoxy grout, waterproofing chemicals, cement, concrete cover blocks and AAC blocks.

Always confirm stock, product packaging and the correct adhesive grade for the project.

Official MYK LATICRETE 335 Super Flex Technical References

• MYK LATICRETE 335 Super Flex – Official Product Page
• MYK LATICRETE 335 Super Flex – September 2025 Technical Data Sheet
• Explore LATICRETE 335 Maxi – Different Product
• Explore MYK LATICRETE Tile Adhesive Range
• Bureau of Indian Standards

The latest manufacturer technical data should take priority over general marketing information when choosing adhesives for large tiles, exterior cladding, swimming pools, natural stones and specialist substrates.

Get MYK LATICRETE 335 Super Flex Grey at ₹900* in Pune

If you are comparing MYK LATICRETE 335 Super Flex Grey 20kg wholesale tile adhesive prices in Pune, The Changediya Cement, Wagholi, offers an advertised ₹900* bag price worth considering.

Whether your project is located in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Chakan, Talegaon, Pimpri, Chinchwad, Shirur, Ranjangaon, Saswad, Baramati or another Pune district area, contact the supplier with your quantity and delivery location.

Explore MYK LATICRETE 335 Super Flex Grey. Contact now for the ₹900* wholesale offer. Request a complete quotation and verify the technical requirements for your tiling project.