MYK PUA 212 4kg Wholesale Price Pune – ₹1500*

The Changediya Cement advertises MYK LATICRETE PUA 212 4kg at ₹1500* per complete factory-proportioned kit.

This offer provides a starting point for builders, contractors and developers comparing specialty polyurethane tile adhesive wholesale rates in Pune district.

PUA 212 is different from general-purpose cement-based tile adhesives. It is a reactive polyurethane bonding system intended for applications that may involve dense tiles, engineered stone, metal or other difficult substrates.

When comparing quotations, consider the total installed cost, the exact substrate, tile size and weight, adhesive coverage, preparation requirements, GST and transportation.

The Changediya Cement offers a Wagholi-based wholesale enquiry contact for customers from Pune City, PCMC and Pune Rural.

MYK LATICRETE PUA 212 – Technical Specifications

Official manufacturer references: PUA 212 Product Page and PUA 212 November 2024 Technical Data Sheet .

Important: The manufacturer's product page lists Type 5T, while the November 2024 data sheet specifies Type 5TS2. Both identify R2T in the EN/ISO classification. For projects requiring a specific Indian classification, obtain the current batch technical declaration from MYK LATICRETE.

What Is MYK LATICRETE PUA 212?

PUA 212 is a high-strength, two-component modified polyurethane adhesive developed for installing approved tiles and stones on a wide range of substrates.

The material is supplied as two pre-proportioned components. After mixing, a chemical reaction produces a strong adhesive suitable for selected difficult tile-fixing systems.

Unlike a cement-based adhesive powder that is mixed with water, PUA 212 uses its own resin and hardener components.

It is particularly useful to evaluate where the substrate is less absorbent, more movement-prone or otherwise unsuitable for an ordinary cementitious adhesive.

What Does Polyurethane (PU) Adhesive Mean?

A polyurethane adhesive is formulated using reactive polyurethane chemistry to create bonding strength and flexibility appropriate to the specified application.

PUA 212 is classified as a reactive resin tile adhesive under EN/ISO R2T rather than as an ordinary cementitious tile adhesive.

What Does R2T Mean?

• R: Reaction resin adhesive.
• 2: Improved performance classification.
• T: Reduced vertical slip.

These performance properties must be considered together with substrate compatibility, tile or stone dimensions, site conditions and installation method.

Is PUA 212 Waterproofing?

No. PUA 212 is primarily an adhesive for bonding tiles and stones to compatible surfaces.

Its resistance to water does not mean it can replace a complete waterproofing membrane, structural adhesive specification or movement-joint sealant.

12 Benefits of MYK PUA 212 Modified PU Adhesive

1. Strong Bonding Performance

Designed for high-strength bonding in appropriate tile and stone installation systems.

2. Two-Component Factory-Proportioned Kit

The 4 kg kit provides 800 g of Part A and 3.2 kg of Part B.

3. R2T Reactive Resin Classification

Meets the manufacturer's declared EN/ISO improved reaction resin classification.

4. Suitable for Approved Metal Substrates

The manufacturer includes metal floors and walls among its supported substrate categories.

5. Suitable for Certain Plywood Systems

Selected plywood and wood-based board installations may be suitable when the board is structurally stable and approved for tiling.

6. Flexible Bonding Characteristics

The modified polyurethane formulation is designed to accommodate limited movement in suitable installations.

7. Non-Sag Vertical Performance

Reduced-slip properties can be valuable for approved wall tile and stone installations.

8. Appropriate for Certain Engineered Stones

The manufacturer lists engineered stones and moisture-sensitive materials among its intended application categories.

9. Compatible With Selected Glass Mosaics

Its product guidance provides a separate installation procedure for glass mosaic tiles.

10. Interior and Exterior Applications

The manufacturer includes suitable interior and exterior floor and wall installations.

11. No Added Mixing Water

The product is prepared by mixing its two supplied components rather than adding water.

12. Competitive Pune Wholesale Offer

The Changediya Cement advertises the 4 kg kit at ₹1500*, providing buyers with a clear local price reference.

Where Can MYK PUA 212 Be Used?

The manufacturer includes various tile types, stone types and substrates within its application scope. All installations require assessment of the specific materials and service conditions.

Manufacturer-Listed Tile and Stone Categories

• Ceramic tiles
• Vitrified tiles
• Semi-vitrified tiles
• Porcelain tiles
• Glass mosaic tiles
• Selected natural stones
• Approved engineered stones
• Marble installations where technically compatible
• Granite tiles
• Precast terrazzo
• Metal tiles

Manufacturer-Listed Substrates

• Concrete floors
• VDF concrete
• Mivan concrete
• Cement mortar beds
• Cement plaster
• Brick masonry
• Concrete masonry blocks
• Approved existing tile surfaces
• Properly prepared stone substrates
• Wood and suitable plywood
• Cement backer boards
• Approved gypsum board systems
• Metal floors and walls
• Compatible epoxy resin substrates
• Approved rubber and PVC systems
• Selected linoleum substrates

Applications Requiring Specialist Review

• High-rise exterior facade cladding
• Heavy stone slabs requiring mechanical anchors
• Structurally unstable metal surfaces
• Flexible or damaged plywood
• Moisture-damaged backer boards
• Resin-backed stone with unknown chemistry
• Special swimming pool systems
• Continuously submerged conditions
• Expansion and structural movement joints
• Highly cracked or damp substrates

Engineering requirement: PUA 212's suitability for metal, plywood or exterior walls does not eliminate the need for structural evaluation, compatible primers where specified, correct load-bearing capacity and mechanical anchors where required.

MYK PUA 212 for Metal Floors and Walls

One of the distinguishing features of PUA 212 is its ability to bond suitable tiles and stones to manufacturer-approved metal substrates.

Metal has different thermal expansion, surface texture and flexibility compared with concrete and cement mortar.

Because of these differences, an appropriate specialty adhesive and carefully prepared substrate may be necessary.

What Metal Surfaces May Be Considered?

The manufacturer identifies metal floors and walls as an application category. The exact metal, coatings, surface preparation and expected movement must be evaluated.

Does PUA 212 Bond Over Rust?

Do not assume so. Rust, grease, oil, loose paint and other contaminants must be removed.

Obtain the specified metal preparation and primer recommendation where required.

Can PUA 212 Replace Metal Fasteners?

No. Where the engineered installation requires structural fixings or mechanical anchors, an adhesive cannot automatically replace them.

MYK PUA 212 for Plywood and Drywall

Wood and drywall-based substrates can behave differently from conventional concrete.

Plywood may bend or move with changes in moisture and structural loading.

The manufacturer's product guidance includes suitable plywood, cement backer board and gypsum board applications.

Important Plywood Installation Checks

• Use structurally sound, suitable plywood.
• Confirm board thickness and load-bearing capacity.
• Ensure proper mechanical fastening.
• Do not tile over rotten or damaged boards.
• Check moisture and movement conditions.
• Follow compatible board-manufacturer instructions.
• Maintain recommended tile joint spacing.
• Use flexible sealants in required movement joints.

The manufacturer recommends flexible joint materials for certain tile or stone installations over drywall and board systems.

Do not use rigid grout to bridge joints that must accommodate structural movement.

MYK PUA 212 for Marble and Engineered Stone

Some natural and engineered stones require special adhesive chemistry because of moisture sensitivity, resin backing or other characteristics.

PUA 212 is designed for selected natural and engineered stone installations.

Can It Be Used for Italian Marble?

It may be suitable for manufacturer-approved marble installations, but compatibility depends on the exact stone.

For expensive or translucent marble, conduct a representative sample installation to check adhesion, staining and appearance.

Can It Be Used for Engineered Quartz?

The manufacturer's application scope includes engineered stones.

However, the resin composition, backing treatment and stone manufacturer's restrictions must be checked.

Can It Prevent All Stone Staining?

No. Product colour and chemistry can influence the appearance of certain natural stones, but staining cannot be ruled out without a compatibility test.

MYK PUA 212 for Glass Mosaic Tiles

The November 2024 technical data sheet includes a dedicated glass mosaic application method.

It describes using an appropriate notched trowel to provide a thin and uniform adhesive bed.

For certain glass mosaic systems, a notch of approximately 4 mm is recommended to achieve a 1.5–2 mm bed.

A 3 mm V-notch may also be used for an approximately 1.5 mm bed where technically appropriate.

Important Installation Requirements

• Prepare a clean, dry and stable substrate.
• Use the specified adhesive trowel.
• Apply only as much adhesive as can be tiled while tacky.
• Position mosaics carefully.
• Ensure complete bedding contact.
• Remove excess adhesive before it cures.
• Follow instructions for paper-faced mosaics.
• Allow adequate curing before grouting.

Glass mosaic compatibility depends on the tile backing, finish and manufacturer instructions.

MYK PUA 212 4kg Coverage and Material Cost

Coverage depends on tile size, trowel notch, substrate flatness and actual adhesive-bed thickness.

The November 2024 technical data sheet specifies approximately 15–17 sq. ft. per 8 kg pack for a 3 mm bed using a 6 × 6 mm square-notched trowel.

At the same rate of consumption, the equivalent theoretical yield of a 4 kg kit is:

Illustrative 4kg Kit Requirements

These estimates are rounded to whole kits, do not include additional site wastage, and assume the stated 3 mm bedding conditions.

For large-format tiles requiring back-buttering, actual material consumption can increase.

Approximate Adhesive Cost Per Square Foot

At ₹1500* per 4 kg kit and the stated 7.5–8.5 sq. ft. theoretical coverage, the base adhesive material cost is approximately ₹176–₹200 per sq. ft. before wastage, GST and transportation.

PUA 212 is a specialty adhesive, so selecting it solely on the basis of price per square foot is not appropriate. Its use should be justified by the project specification.

How to Apply MYK LATICRETE PUA 212

Step 1 – Confirm Product Suitability

Verify the tile or stone, substrate, installation conditions and required adhesive performance.

Step 2 – Check Substrate Strength

The surface must be structurally sound, stable and free from loose material.

Step 3 – Clean the Surface

Remove dust, grease, oil, loose paint and other contamination.

Step 4 – Check Surface Dryness

The manufacturer's technical sheet specifies application on dry surfaces without rising dampness.

Step 5 – Correct Substrate Unevenness

Use suitable levelling materials before installing tiles or stones.

Step 6 – Prepare Metal or Board Substrates

Follow the relevant surface preparation and board-manufacturer instructions.

Step 7 – Check the Factory-Proportioned Kit

Confirm that the 4 kg pack contains 0.8 kg Part A and 3.2 kg Part B.

Step 8 – Mix at the Correct Ratio

The prescribed mixing ratio is Part A : Part B = 1 : 4 by weight. Mix the supplied components completely using the manufacturer's low-speed mixing procedure.

Step 9 – Do Not Add Water

PUA 212 is a two-component reactive adhesive and should not be diluted with water.

Step 10 – Work Within the Usable Time

The technical sheet advises preparing only the quantity that can be used within approximately one hour at 25°C.

Step 11 – Apply a Contact Coat

Use the flat side of the trowel to work adhesive into the prepared surface.

Step 12 – Comb With the Appropriate Trowel

Select the notch size according to the tile format and required bedding contact.

Step 13 – Back-Butter Larger Tiles

The manufacturer calls for back-buttering large-format tiles greater than 12 × 12 inches to support proper bedding.

Step 14 – Install While Adhesive Is Fresh

Apply only as much material as can be tiled promptly. Do not install into adhesive that has become skinned over.

Step 15 – Check Adhesive Transfer

Periodically lift tiles to verify adequate adhesive contact.

Step 16 – Maintain Movement Joints

Use the specified tile gaps, perimeter joints and expansion joints. Do not cover structural expansion joints with rigid adhesive.

Step 17 – Allow Proper Curing

The technical sheet lists approximately 24 hours before foot traffic or grouting and three days before normal use under stated conditions.

Health and safety: Wear chemical-resistant gloves, eye protection and suitable work clothing. Follow the latest Part A and Part B safety data sheets and provide ventilation.

PUA 212 vs Cementitious Tile Adhesive

The correct product depends on the substrate, tile backing, dimensions, exposure and project design.

For straightforward ceramic floor tiling over suitable cement-based screeds, a simpler adhesive may be sufficient.

For approved metal, plywood, engineered stone or other difficult substrates, PUA 212 may be technically appropriate.

Why Buy MYK PUA 212 from The Changediya Cement?

For specialist construction chemicals, buyers should evaluate product authenticity, the correct two-component system, batch details, current pricing and final delivered cost.

The Changediya Cement, Wagholi, Pune, offers a convenient wholesale enquiry contact for customers seeking MYK PUA 212 and related construction materials.

1. Competitive Advertised ₹1500* Price

The 4 kg kit offer gives buyers a clear price reference for comparison.

2. Convenient Wagholi Location

Situated opposite Ganpati Vajan Kata, near BJS College on Pune Nagar Road.

3. Wholesale Quantity Enquiries

Contractors, developers and procurement teams can request quotations for project quantities.

4. Specialty Adhesive Selection

Customers can enquire about PUA 212 for approved metal, plywood, stone and other specialist tiling.

5. Direct Phone Communication

Buyers can contact the supplier about current price, available stock and packaging details.

6. WhatsApp Quote Requests

Share the required quantity and delivery destination directly.

7. Pune City Enquiries

Customers across Pune City can request wholesale quotations.

8. PCMC Enquiries

Buyers from Pimpri, Chinchwad, Wakad, Moshi and Bhosari can contact the business.

9. Pune Rural Enquiries

Customers from Shirur, Chakan, Ranjangaon, Baramati and other towns can enquire about transport arrangements.

10. Related Building Materials

The Changediya Cement's websites feature tile adhesives, grouts, cement and waterproofing products.

11. Transparent Kit Pricing

The advertised 4 kg kit rate helps buyers estimate the material budget.

12. Delivered Cost Comparison

Request a quotation showing the product, quantity, applicable GST and freight.

Searching for MYK PUA 212 4kg at wholesale rates in Pune? Explore the offer from The Changediya Cement, Wagholi, and contact the business for a current quotation.

MYK PUA 212 Wholesale Enquiries Across Pune City, PCMC and Pune Rural

The Changediya Cement welcomes wholesale enquiries from customers throughout Pune district. Confirm actual delivery availability, transport charges and order terms for your exact construction site.

Wagholi and Eastern Pune

Wagholi, Kharadi, Chandan Nagar, Viman Nagar, Wadgaon Sheri, Lohegaon, Dhanori, Vishrantwadi, Yerawada, Kalyani Nagar, Koregaon Park, Mundhwa, Keshav Nagar, Hadapsar, Magarpatta, Amanora, Manjari, Ghorpadi, Sopan Baug, Loni Kalbhor, Theur, Kunjirwadi, Uruli Kanchan, Kesnand, Bakori, Lonikand, Perne, Tulapur and nearby villages.

Central Pune

Pune Station, Camp, Swargate, Shivajinagar, Deccan Gymkhana, Model Colony, Erandwane, Kasba Peth, Rasta Peth, Somwar Peth, Raviwar Peth, Budhwar Peth, Shukrawar Peth, Shaniwar Peth, Sadashiv Peth, Narayan Peth, Nana Peth, Bhawani Peth, Guruwar Peth, Mangalwar Peth, Ganesh Peth and Ganj Peth.

Western Pune

Kothrud, Karve Nagar, Warje, Bavdhan, Pashan, Aundh, Baner, Balewadi, Sus, Mahalunge, Bhugaon, Bhukum, Pirangut, Lavale, Paud, Nande, Ghotawade, Chandani Chowk, Maan and Mulshi.

Southern Pune

Parvati, Sahakar Nagar, Bibwewadi, Dhankawdi, Katraj, Ambegaon Budruk, Ambegaon Khurd, Narhe, Vadgaon Budruk, Dhayari, Sinhagad Road, Khadakwasla, Kirkatwadi, Nanded City, Kondhwa, NIBM Road, Wanowrie, Salunke Vihar, Fatima Nagar, Mohammadwadi, Undri, Pisoli, Yewalewadi, Holkarwadi, Phursungi, Uruli Devachi and Wadki.

Pimpri-Chinchwad (PCMC)

Pimpri, Chinchwad, Akurdi, Nigdi, Pradhikaran, Bhosari, MIDC Bhosari, Kasarwadi, Phugewadi, Dapodi, Sangvi, New Sangvi, Pimple Gurav, Pimple Saudagar, Pimple Nilakh, Rahatani, Wakad, Tathawade, Punawale, Ravet, Kiwale, Mamurdi, Thergaon, Kalewadi, Chikhali, Moshi, Charholi, Dudulgaon, Talawade, Triveni Nagar, Dighi, Dehu Road and Nashik Phata.

Pune Nagar Road and Shirur Belt

Wagholi, Lonikand, Perne, Koregaon Bhima, Sanaswadi, Shikrapur, Ranjangaon, Karegaon, Khandale, Pabal, Talegaon Dhamdhere, Nhavare, Wadu Budruk, Yavat, Patas, Kedgaon, Kurkumbh, Daund, Shirur, Inamgaon and Pimpale Jagtap.

Chakan, Khed and North Pune

Chakan, Kuruli, Kharabwadi, Nighoje, Mahalunge Ingale, Nanekarwadi, Medankarwadi, Chimbali, Moi, Alandi, Markal, Dhanore, Shel Pimpalgaon, Rajgurunagar, Khed, Dehu, Talegaon Dabhade and Vadgaon Maval.

Hinjewadi and Maval

Hinjewadi Phase 1, Hinjewadi Phase 2, Hinjewadi Phase 3, Maan, Marunji, Nere, Jambhe, Gahunje, Somatane, Kanhe, Kamshet, Lonavala, Malavli, Karla and adjoining localities.

Pune Rural Talukas

Haveli, Shirur, Khed, Maval, Mulshi, Daund, Purandar, Bhor, Velhe, Baramati, Indapur, Junnar and Ambegaon.

Pune Rural Towns and Villages

Manchar, Ghodegaon, Narayangaon, Junnar, Alephata, Otur, Baramati, Malegaon Budruk, Indapur, Bhigwan, Walchandnagar, Jejuri, Saswad, Nira, Bhor, Nasrapur, Khed Shivapur, Kapurhol, Velhe and nearby villages.

Searching for MYK PUA 212 4kg in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Talegaon, Shirur, Ranjangaon, Saswad, Baramati, Junnar, Indapur or Pune Rural? Contact The Changediya Cement for your current wholesale quotation.

The named locations identify potential wholesale enquiry areas, not a guarantee of stock or delivery to every location.

MYK PUA 212 4kg Bulk Wholesale Price Chart

The following illustrative values use the advertised ₹1500* per 4 kg kit rate.

These calculations do not imply guaranteed quantity discounts.

GST and transportation are additional.

4kg vs 8kg Pack Comparison

The Changediya Cement also has an existing 8 kg PUA 212 listing at an advertised ₹2600*.

At those rates, two 4 kg kits have a base value of ₹3000*, compared with ₹2600* for one 8 kg kit.

The larger kit may be more economical for an installation capable of using the mixed material promptly.

However, do not open a larger kit unless the installer can handle its full quantity within the working time.

How to Order MYK PUA 212 4kg at ₹1500*

1. Explore the product: Review the MYK LATICRETE PUA 212 official technical sheet.
2. Confirm the substrate: Check whether your metal, plywood, concrete or board system is suitable.
3. Check the tile or stone: Verify dimensions, backing and application exposure.
4. Estimate coverage: Use the manufacturer's product-specific consumption data.
5. Choose the pack: Confirm whether 4 kg, 8 kg or 10 kg is appropriate.
6. Contact now: Call The Changediya Cement at 9055079555.
7. Specify the material: Request MYK LATICRETE PUA 212 Modified PU Adhesive 4kg.
8. Share the quantity: Mention the number of complete kits.
9. Provide the site address: Share your Pune City, PCMC or Pune Rural location.
10. Confirm the price: Request the ₹1500* wholesale quotation.
11. Check GST and transport: Request the final delivered amount.
12. Verify packaging: Check both sealed components and batch information.
13. Confirm the order: Review stock, delivery terms and invoice details.

40 Frequently Asked Questions About MYK PUA 212 4kg

Explore Related MYK LATICRETE Products and Construction Materials

• Explore The Changediya Cement Website
• Explore MYK PUA 212 4kg ₹1500* Listing
• Explore MYK PUA 212 8kg Listing
• Explore MYK LATICRETE 335 Super Flex Grey
• Explore MYK LATICRETE 325 High Flex Grey
• Explore MYK LATICRETE SP-100 DUO Grout
• Explore Other Building Materials

Customers may also enquire about tile adhesives, epoxy grouts, waterproofing chemicals, cement, concrete cover blocks, AAC blocks and related construction products.

Official MYK LATICRETE PUA 212 Technical References

• MYK LATICRETE PUA 212 Official Product Page
• PUA 212 November 2024 Technical Data Sheet
• Explore MYK LATICRETE Specialty Adhesives
• Explore Official Adhesive Coverage Calculator
• Bureau of Indian Standards

For critical installations, consult the latest manufacturer technical data and safety information for both PUA 212 components.

Get MYK PUA 212 4kg at ₹1500* in Pune

If you are comparing MYK LATICRETE PUA 212 4kg wholesale prices in Pune, The Changediya Cement provides a Wagholi-based enquiry option at the advertised ₹1500* rate.

Whether your project is in Wagholi, Kharadi, Hadapsar, Baner, Wakad, Hinjewadi, Moshi, Pimpri, Chinchwad, Chakan, Shirur, Ranjangaon, Talegaon, Saswad, Baramati or another Pune district location, contact the supplier with your requirements.

Explore PUA 212, contact The Changediya Cement now, confirm the 4 kg kit availability and request your complete wholesale quotation.